Preparation of aqueous two-phase systems composed of two pH-response polymers and liquid-liquid extraction of demeclocycline.

Aqueous two-phase systems have potential applications for separation and purification of bioproducts in bio-industry. However, a key problem is the recovery of the polymers forming aqueous two-phase systems. In this study, two novel random copolymers (P(ADB) and P(ADBA)) were synthesized using acrylic acid, dimethylamino-ethyl methacrylate, butyl methacrylate and allyl alcohol as monomers and used to form pH response aqueous two-phase systems. The recoveries of P(ADB) and P(ADBA) are 97.18% and 98.87% and the pI of P(ADB) and P(ADBA) are 2.79 and 4.01, respectively. Demeclocycline was partitioned in the P(ADB)/P(ADBA) aqueous two-phase systems and the partition coefficient reached 0.085, in the presence of MgSO4 (60 mmol/L) at pH 5.28.

Reversed-phase high-performance liquid chromatography coupled to ultraviolet and electrospray time-of-flight mass spectrometry on-line detection for the separation of eight tetracyclines in honey samples.

Eight antibiotics, chlortetracycline, demeclocycline, doxycycline, methacycline, minocycline, oxytetracycline, tetracycline and rolitetracycline, were separated and quantified in Spanish honey extracts of different floral origin using a commercial RP-C18 HPLC column and two different on-line detectors (diode array and electrospray time-of-flight mass spectrometry (ESI-TOF-MS) systems). Operating a linear gradient at a flow of 2 ml min(-1) the HPLC separation of the eight antibiotics was obtained within 10 min with good peak symmetry and an acceptable resolution (2.1) for the critical band pair rolitetracycline and oxytetracycline. Values of the numbers of theoretical plates (N) were comprised between 2328 and 19448 while the limits of detection in honey were within 0.02-1.03 microg kg(-1) in the case of UV detection and 0.05-0.76 microg kg(-1) for ESI-TOF-MS detection (operating in negative mode). A recovery study was carried out by preparing some quality control samples at four levels of concentration (10, 25, 50 and 100 microg kg(-1)) and percentages between 72% and 98% were attained.

Rapid separation of tetracycline derivatives and their main degradation products by capillary zone electrophoresis.

A mixture of five tetracycline (TC) derivatives: minocycline (MC), demeclocycline (DMCTC), doxycycline (DC), and sancycline (SC), as well as each TC derivative from its main degradation product were separated by capillary zone electrophoresis (CZE). The influence of the pH and the concentration and nature of the background electrolyte (BGE) on the separations was investigated. Ethylenediaminetetraacetic acid (EDTA; 1 mM) was used as additive in a 25 mM phosphate buffer (pH 2.3) because this BGE enabled the rapid separation of the TC derivatives and of each TC derivative from its respective degradation product in less than 6 min. After optimization of the separation conditions, the analytical characteristics of the method were investigated. The parameters involved were linearity, precision (repeatability and reproducibility), and limits of detection (LODs). LODs obtained for the five TC derivatives studied were about 3 microg/mL. Finally, the CZE method developed was applied to study the stability of TC derivatives and to analyze the TC derivative content in three different pharmaceutical preparations.

Evaluation of amperometric detection for the liquid-chromatographic determination of tetracycline antibiotics and their common contaminants in pharmaceutical formulations.

A sensitive high-performance liquid chromatographic technique with amperometric detection has been developed for the determination of seven commercially used tetracyclines in bulk powders and pharmaceutical preparations. The technique is based on the oxidation of these compounds and their contaminants at the glassy carbon electrode. The extraction procedures are simple and the HPLC conditions separate the tetracyclines from their major degradation products. The chromatography was performed using a commercially available octadecylsilane column, with a mobile phase: KH2 PO4 (pH = 2.5; 0.05 M) - acetonitrile (84:16, v/v) and detection at 1.2 V. The technique permits the simultaneous determination of trace amounts of chlortetracycline, demeclocycline, doxycycline, methacycline, minocycline, oxytetracycline and tetracycline as well as the separation of their common impurities (epi, anhydro and epianhydro contaminants) with detection limits of 0.1-1.0 ng microl(-1) and recoveries of 99.1-100.4%. No interference was observed from the commonly present excipients in pharmaceutical formulations.